Comprehensive End of Tenancy Cleaning Checklist: Room by Room Walkthrough

You can also download this list in a print-ready format to use as a guide.
When planning your end-of-tenancy cleaning, it’s important to understand what truly qualifies as a professional standard. This distinction not only affects the thoroughness of your cleaning but can also determine whether you secure your full deposit back. To learn more about the expectations and benefits of hiring expert cleaners, check out our complete guide on professional end-of-tenancy cleaning. It’s essential to familiarize yourself with what is included in a comprehensive cleaning service.
In our guide, “professional end of tenancy cleaning explained,” you’ll find detailed information on the tasks typically performed, ensuring that your property is left in pristine condition. Understanding these standards can give you peace of mind and help you avoid any disputes with your landlord regarding the return of your deposit.
Additionally, having a clear end of tenancy cleaning checklist can serve as a valuable tool to ensure nothing is overlooked during the cleaning process. By following this checklist, you can systematically address every necessary area, making it easier to demonstrate that your property meets the required standards. This proactive approach not only enhances your chances of a full deposit return but also fosters a positive relationship with your landlord.
It's also important to consider the end of tenancy cleaning duration, as allocating sufficient time ensures that every aspect of the cleaning is addressed thoroughly. Rushing through the process may lead to overlooked areas, potentially affecting the cleanliness standard and the likelihood of receiving your deposit back. By planning ahead and allowing ample time for the cleaning, you can achieve the desired results while minimizing stress.
Utilizing professional cleaning equipment for tenants can significantly enhance the quality of your cleaning efforts, ensuring that even the most stubborn stains and grime are effectively tackled. Investing in high-quality tools not only saves you time but also guarantees a level of cleanliness that meets professional standards. Ultimately, this could make all the difference in securing your deposit and leaving a positive impression on your landlord.
Kitchen
Appliance Cleaning
Oven and Hob
- Remove racks, trays, and oven shelves for separate cleaning
- Apply oven cleaner to the interior and leave for recommended dwell time (usually 30-60 minutes)
- Clean control knobs by removing (if possible) and soaking in warm, soapy water
- Remove and clean oven door glass (both sides) if accessible
- Scrub interior surfaces, including roof, sides, and base
- Clean exterior surfaces, including handles and control panel
- Thoroughly clean hob/stovetop, removing any burner parts for deep cleaning
- For electric stoves, carefully clean heating elements and drip pans
- Polish all chrome or stainless steel components
- Tip: Line the oven with aluminium foil during your tenancy to prevent future cleaning hassle
Refrigerator/Freezer
- Unplug and thoroughly defrost freezer (plan for this 24 hours ahead)
- Remove and wash all shelves, drawers, and door compartments
- Clean interior surfaces with food-safe cleaner
- Wipe exterior surfaces, paying special attention to handles and top surfaces
- Clean door seals where mould and food residue collect
- Pull out the fridge if possible to clean behind and underneath
- Leave doors slightly open after cleaning to prevent odours (if power is off)
Microwave
- Remove and clean the turntable and support
- Clean interior with all-purpose cleaner or warm water with lemon juice
- Wipe exterior surfaces, including the top, sides, and control panel
- Clean around the door seal where food debris collects
- Tip: Heat a bowl of water with lemon for 2 minutes before cleaning to loosen dried food particles
Dishwasher
- Remove and clean filters (often neglected and full of food residue)
- Clean spray arms and check for blockages
- Wipe interior walls and door gaskets
- Run an empty cycle with dishwasher cleaner or white vinegar
- Clean exterior, including control panel and handle
- Wipe inside the door edges where grime collects

Cabinet Cleaning
Exterior Surfaces
- Remove all items from countertops
- Use appropriate cleaner for cabinet material (wood, laminate, painted)
- Pay special attention to cabinet handles and edges
- Clean cabinet faces, including any decorative moulding
- Address grease buildup, especially on cabinets near the stove
Interior Surfaces
- Remove all items from cabinets and drawers
- Vacuum crumbs and debris first
- Wipe all interior surfaces with appropriate cleaner
- Pay special attention to corners and joints where crumbs collect
- Allow to dry completely before replacing shelf liners (if applicable)
- Tip: Use newspaper to line cabinets during your tenancy for easier cleaning
Surface Cleaning
Countertops and Backsplash
- Use the appropriate cleaner for the surface material (e.g., granite, laminate).
- Remove stains with suitable treatments (baking soda paste for stubborn stains)
- Clean backsplash tiles, paying attention to grout lines
- Address any silicone seals around sinks and countertop edges
- Polish if appropriate for the material
Sink and Taps
- Remove limescale buildup with a specialised descaler
- Polish chrome fixtures to remove water spots
- Clean and unclog the drain (remove the trap if necessary)
- Scrub around the base of taps where grime accumulates
- Clean underneath the sink lip where mould can form
- Address the sink overflow hole, often neglected but visible during inspections
Floor Cleaning
Tile Floors
- Sweep or vacuum thoroughly
- Mop with appropriate cleaner
- Address grout lines with a small brush and suitable cleaner
- Pay attention to corners and edges where dirt collects
Vinyl/Laminate Floors
- Sweep or vacuum thoroughly
- Damp mop with manufacturer-recommended cleaner
- Avoid excess water, which can damage these floors
- Address any sticky spots with appropriate spot treatments
Wooden Floors
- Sweep or vacuum thoroughly
- Clean with wood-specific cleaner
- Buff dry to prevent water damage
- Avoid harsh chemicals that can strip finishes
Inspection Hotspots
Extractor Fan/Hood
- Remove and soak filters in a degreasing solution
- Clean the exterior housing and controls
- Wipe all surfaces, including underneath
- Address built-up grease on and around the unit
- Check and clean the vent if accessible
Hidden Grease Areas
- Clean tops of wall cabinets where greasy dust accumulates
- Wipe the space between appliances and cabinets
- Address the area behind the stove if accessible
- Clean kickboards and toe-kicks under cabinets
- Check light fixtures for greasy residue
Limescale Problem Areas
- Descale tap spouts and shower heads
- Address mineral buildup around sink fixtures
- Clean kettle if included with the property
- Check the washing machine soap drawer for limescale
Final Kitchen Touches
- Wipe light switches and power outlets
- Clean any kitchen windowsills and window tracks
- Empty and clean the bin and bin storage area
- Address scuff marks on walls and kickboards
- Check that all cabinet hinges and drawer runners are clean
- Ensure all surfaces are dry and streak-free
Bathroom
Bath and Shower Cleaning
Bathtub Surface
- Remove all personal items and toiletries
- Apply appropriate cleaner based on tub material (porcelain, acrylic, or fibreglass)
- Address soap scum with a non-abrasive cleaner
- Pay special attention to the bath rim and corners where mould forms
- Clean overflow cover and drain (often neglected but highly visible)
- Polish chrome or metal fixtures until streak-free
- Check and clean around tap bases where grime accumulates
- Remove limescale deposits with a specialised descaler
Shower Enclosure
- Clean glass doors with glass cleaner or white vinegar solution
- Remove limescale from glass using specialised products
- Clean shower track/runner where mould and soap scum collect
- Address door seals and sweeps where black mould often forms
- Clean shower head thoroughly (soak in vinegar to dissolve mineral deposits)
- Scrub shower caddy or shelving if present
- Check and clean drain cover and surrounding area
Tile and Grout Cleaning
Wall Tiles
- Spray with suitable bathroom cleaner
- Wipe down all tiled surfaces
- Pay attention to the bottom row of tiles where grime accumulates
- Clean corner joints where mould tends to develop
- Polish tiles for a streak-free finish
Grout Lines
- Make a paste of baking soda and water for light stains
- Apply specialised grout cleaner for tougher stains
- Use a grout brush or old toothbrush to scrub lines thoroughly
- For stubborn mould, apply a bleach solution (1:4 with water)
- Rinse thoroughly and dry completely
- Consider a grout sealer for seriously stained grout (consult landlord first)
Mold Removal Tips
- Ventilate the bathroom well when cleaning mould
- Wear gloves and consider a mask for more significant mould problems
- Apply mold-specific cleaner or bleach solution
- Allow to sit for recommended time (usually 10-15 minutes)
- Scrub with a brush and rinse thoroughly
- Dry completely to prevent immediate regrowth
- For persistent mould, report to the landlord as it may indicate ventilation issues

Toilet Deep Cleaning
Bowl Cleaning
- Apply toilet cleaner or bleach under the rim and throughout the bowl
- Allow the product to work for the recommended time
- Scrub thoroughly with a toilet brush, paying attention to the waterline and under the rim
- Flush to rinse, keeping brush in flowing water to clean it
- For stubborn limescale rings, use a pumice stone (carefully) or specialised cleaner
Exterior Cleaning
- Clean toilet seat, both top and underneath
- Wipe the entire exterior of the toilet, including the tank and base
- Pay special attention to hinges and connection points
- Clean behind the toilet and around the base where dust collects
- Check and clean any mould appearing on silicone seals
- Sanitize the flush handle/button
- Clean any dust on top of the cistern
Sink and Vanity Area
Sink Basin
- Clean with appropriate bathroom cleaner
- Remove limescale from taps and fixtures
- Clean overflow holes thoroughly (often missed)
- Address the area where the sink meets the countertop
- Clean underneath the basin edge where grime collects
- Ensure the drain is clean and free-flowing
Vanity and Storage
- Empty all cabinets and drawers
- Wipe the interior of all storage spaces
- Clean exterior surfaces according to material type
- Polish handles and fixtures
- Check for and clean any water damage or mould
- Address toothpaste splatter on and around the vanity
Mirrors and Glass
Mirror Cleaning
- Use glass cleaner or vinegar-water solution
- Spray onto the cloth rather than directly on the mirror to prevent damage to the backing
- Clean from top to bottom using a lint-free cloth
- Pay attention to edges and corners where grime collects
- Check for and clean any toothpaste splatter
- Ensure the frame is clean and dust-free
Glass Surfaces
- Clean shower screens and glass doors thoroughly
- Remove limescale buildup with appropriate products
- Polish to a streak-free finish
- Clean glass shelving if present
- Address any silicone seals around glass panels
Ventilation Systems
Extractor Fan
- Turn off power at the circuit breaker before cleaning
- Remove cover (if possible) and soak in warm soapy water
- Clean fan blades with a small brush or vacuum with a brush attachment
- Wipe housing with a damp cloth
- Check and clean vent ducting if accessible
- Replace cover once dry
- Test operation after cleaning
Air Vents
- Remove covers if possible and wash
- Vacuum inside accessible vents
- Wipe clean with a damp cloth
- Check for and address any mould around vents
Inspection Hotspots
Limescale Problem Areas
- Shower heads and tap spouts
- Around the base of taps
- Toilet bowl waterline
- Shower doors and screens
- Tile grout lines in hard water areas
- Inside toilet cistern (if accessible)
Hidden Mold Areas
- Silicone seals around bath, shower, and sink
- Behind the toilet (especially near the floor)
- Under bath panel, if accessible
- Underneath sink cabinets
- Inside medicine cabinets or vanity units
- Ceiling corners, significantly above the shower
- Inside toilet tank
Final Bathroom Touches
- Wipe all light switches and pull cords
- Clean light fixtures and replace any burned-out bulbs
- Check and clean windowsills and window frames
- Mop floor, paying attention to corners and behind the toilet
- Clean door, including top edge and handle
- Ensure all surfaces are dry to prevent water spots
- Leave the bathroom door open to aid ventilation
Living Room
Dusting and Surface Cleaning
High Surfaces
- Start with ceiling corners to remove cobwebs
- Clean light fixtures, ceiling fans, and lampshades (remove dust that can be visible when lights are on)
- Dust tops of door frames, picture rails, and tall furniture
- Wipe air vents and heating elements
- Clean ceiling light fittings and replace any blown bulbs
- Dust wall-mounted items, including smoke detectors and carbon monoxide alarms
Window Areas
- Clean window frames and tracks where dust and dirt accumulate
- Wipe window sills thoroughly, including corners
- Clean glass with appropriate cleaner (interior only, unless specifically required)
- Address condensation marks on frames
- Clean blinds slat by slat (dust top-to-bottom, then wipe with slightly damp cloth)
- For curtains, vacuum with upholstery attachment and check for washing instructions
- Clean curtain rods and fixtures
Furniture and Surfaces
- Move furniture to clean underneath and behind
- Dust all horizontal surfaces thoroughly
- Wipe furniture according to its material (use wood polish for wooden surfaces, etc.).
- Clean inside drawers and shelves if they belong to the property
- Pay attention to coffee tables, side tables, and shelving units
- Vacuum upholstered furniture and remove cushions to clean underneath
- Address marks or stains on furniture with appropriate treatments
Detailed Cleaning Elements
Skirting Boards and Woodwork
- Dust first to remove loose particles
- Wipe with appropriate cleaner based on the finish
- Pay attention to corners and decorative moulding where dust collects
- Clean behind radiators using a radiator brush
- Address any scuff marks or dirt buildup
- Check for and clean areas where pets or children may have caused marks
Doors and Door Frames
- Clean the entire door surface on both sides
- Pay special attention to areas around handles where fingerprints accumulate
- Clean the top edge of the door (often neglected but checked during inspections)
- Wipe door frames completely, including inside the rebate
- Clean the threshold and bottom of the door
- Check for and address any marks or scuffs
Switches and Sockets
- Turn off power at the circuit breaker for safety
- Wipe light switches to remove fingerprints and dirt
- Clean around switch plates where dust collects
- Dust power outlets and media connection points
- Clean thermostat controls and any other wall-mounted controls
- Ensure all are completely dry before restoring power

Floor Cleaning
Carpet Cleaning
- Vacuum thoroughly, using crevice tools for edges and corners
- Move furniture to vacuum underneath (if not already done)
- Address high-traffic areas with extra attention
- Treat stains with appropriate carpet cleaner
- Consider professional carpet cleaning for heavily soiled carpets
- Allow adequate drying time before the final inspection
- Vacuum in different directions for best results and to lift the pile
Hard Floor Cleaning
- Sweep or vacuum to remove loose dirt and dust
- Use appropriate cleaner for the specific floor type:
- Laminate: barely damp mop with specific laminate cleaner
- Hardwood: wood-specific cleaner and minimal moisture
- Tile: tile cleaner with attention to grout lines
- Vinyl: mild detergent solution and damp mop
- Avoid excess water on any flooring type
- Pay special attention to corners and edges
- Address any stuck-on residue or marks
- Buff dry where appropriate for a streak-free finish
Inspection Hotspots
Odor Management
- Smoke Odors: If smoking has occurred, consider:
- Wiping walls with vinegar solution to neutralise odours
- Steam cleaning carpets and upholstery
- Cleaning curtains if they absorb smoke
- Using odor-eliminating products (not just masking sprays)
- Cleaning inside light fixtures where smoke particles collect
- Replacing light bulbs which can retain smoke odour
- Pet Odors: Address thoroughly by:
- Treating carpet and upholstery with enzyme cleaners
- Checking for and cleaning any "accident" spots
- Paying extra attention to areas where pets spend the most time
- Cleaning air vents that may circulate pet dander
- Considering professional cleaning for severe cases
Upholstery Stain Removal
- Identify stain type to determine appropriate treatment
- Test cleaning products on a hidden area first
- Blot stains rather than rubbing (which can spread the stain)
- For water-based stains, use appropriate upholstery cleaner
- For oil-based stains, use a specialised solvent-based cleaner
- Allow adequate drying time
- For persistent stains, consider professional cleaning
- Check the rental agreement regarding furniture cleaning requirements
Electronics and Media Areas
- Dust TV screens with appropriate screen cleaner
- Clean remote controls with disinfectant wipes
- Wipe TV stands and entertainment units thoroughly
- Address cable management areas where dust collects
- Clean speaker grills with a vacuum brush attachment
Final Living Room Touches
- Check for and remove any marks on walls
- Ensure all personal items have been removed
- Test all light bulbs and replace any that aren't working
- Close and secure windows
- Return furniture to original positions (refer to check-in inventory)
- Conduct a final walkthrough from different angles to spot any missed areas
- Take clear, well-lit photos of the cleaned room for your records
Bedroom
Mattress Care and Cleaning
Surface Cleaning
- Remove all bedding and mattress protectors
- Vacuum the entire mattress surface using an upholstery attachment
- Pay special attention to seams, tufts, and buttons where dust collects
- Spot clean any stains with appropriate cleaner based on stain type
- For biological stains, use enzyme-based cleaners
- For general freshening, sprinkle baking soda, leave for 1-2 hours, then vacuum thoroughly
Mattress Airing
- Stand mattress against the wall to air both sides if possible
- Open windows to improve air circulation (weather permitting)
- Ensure the mattress is completely dry before replacing
- If the mattress has persistent odours, consider specialised fabric freshener
- For severe stains or damage, consult the landlord about professional cleaning
Bed Frame Cleaning
- Vacuum all surfaces of the bed frame
- Dismantle if necessary to clean underneath and between joints
- For wooden frames, use appropriate wood cleaner
- For metal frames, wipe with a damp cloth and dry thoroughly to prevent rust
- Check for and address dust or debris in screw holes or crevices
- Pay special attention to headboards, especially fabric ones, which collect dust and oils
Storage Area Cleaning
Wardrobes and Closets
- Remove all personal items and clothing
- Vacuum or wipe interior shelves, starting from top to bottom
- Check and clean the top of the wardrobe where dust accumulates
- Wipe wardrobe doors inside and out
- Clean tracking on sliding doors
- Polish handles and fixtures
- Check for and remove any clothing marks or scuffs
- Leave doors slightly open after cleaning to prevent musty odours
Drawers and Bedside Tables
- Empty all contents completely
- Vacuum inside drawers to remove dust and debris
- Wipe interior surfaces with an appropriate cleaner
- Check for and clean any stains or sticky spots
- Clean exterior surfaces according to material
- Pay attention to handles and drawer runners
- Ensure drawers slide smoothly after cleaning
Under-Bed Storage
- Remove all items from under-bed storage areas
- Vacuum thoroughly, using crevice attachments to reach corners
- Wipe any built-in storage components
- Check for and address dust bunnies, which commonly accumulate
- Ensure storage drawers are clean inside and out
Surface and Fixture Cleaning
Mirrors and Glass
- Clean all mirrors with glass cleaner or vinegar solution
- Wipe from top to bottom to prevent streaking
- Pay attention to mirror edges and frames
- Check for and clean any splash marks or fingerprints
- Polish to a streak-free finish
- Clean any glass cabinet doors or picture frames
Light Fixtures
- Turn off and allow lights to cool completely before cleaning
- Remove shades and wash if applicable
- Dust bulbs carefully (when cool) and check they're working
- Clean ceiling fixtures to remove dust and insects
- Wipe bedside lamps, including bases and switches
- Replace any blown bulbs
- Check wall-mounted lights and clean thoroughly

Windows and Window Treatments
- Clean window frames and sills
- Wipe windows with appropriate glass cleaner
- Clean blinds slat by slat or according to manufacturer instructions
- Vacuum curtains or wash/dry clean according to labels
- Check curtain rails and clean dust that accumulates
- Ensure all hardware is functional and clean
Floor and Carpet Cleaning
Carpet Cleaning
- Move all furniture to clean underneath
- Vacuum thoroughly in multiple directions to lift the pile
- Address high-traffic areas with extra attention
- Treat any stains with appropriate spot cleaners
- Pay special attention to areas near the bed where dust and hair accumulate
- Consider professional steam cleaning for heavily soiled carpets
- Allow adequate drying time before the final inspection
Hard Floor Cleaning
- Sweep or vacuum to remove dust and debris
- Use appropriate cleaner for floor type (wood, laminate, vinyl, tile)
- Pay attention to corners and edges where dust collects
- Clean under radiators and furniture
- Address any scuff marks or stains
- Buff dry if needed to prevent watermarks
Inspection Hotspots
Under-Bed Areas
- This is the most commonly missed area in bedroom cleaning
- Move the bed thoroughly to access the entire floor area
- Vacuum thoroughly, including corners
- Check for and remove any items that may have fallen under the bed
- Look for dust accumulation on baseboards under beds
- Inspect for cobwebs in corners at floor level
Hidden Corners and Crevices
- Check corners where walls meet the ceiling
- Inspect areas behind doors and furniture
- Clean inside built-in fixtures and joinery
- Check corners of closets and wardrobes
- Inspect and clean air vents, which often collect dust
- Look behind radiators and clean thoroughly
Wall Surfaces
- Check for marks from furniture or bedheads
- Look for finger marks around light switches
- Inspect for any sticky residue from tape or adhesives
- Address any scuffs at furniture height
- Clean marks around doorframes
- Check for cobwebs in ceiling corners
Odor Issues
- Address any musty smells in closets with appropriate fresheners
- Check for and clean any spills that might cause odours
- Ensure all personal toiletries and fragrances are removed
- Consider fabric freshener for carpets and curtains
- Leave windows open when possible to air the room
Final Bedroom Touches
- Return all furniture to its original positions
- Ensure all personal items are removed
- Check all drawers and storage spaces are empty
- Test light bulbs and replace any that aren't working
- Close and secure windows
- Take clear photographs of the cleaned room for your records
- Conduct a final inspection using a flashlight to spot any missed dust
Additional Areas
Hallways and Staircases Walls and Skirting Boards
- Remove scuff marks and fingerprints from walls (common in narrow hallways)
- Clean light switches and surrounding areas where fingerprints accumulate
- Dust and wipe all skirting boards, paying attention to corners
- Check for cobwebs in ceiling corners and light fixtures
- Wipe door frames and tops of doors, which collect dust. Staircase Cleaning
- Vacuum stairs thoroughly, including corners and edges
- Clean between balusters/spindles using a cloth-wrapped ruler or specialised tool
- Dust and polish bannisters and handrails
- Wipe stair risers, which often show scuff marks
- Address any squeaky steps or loose carpet (report to the landlord if necessary)
- For wooden stairs, use the appropriate wood cleaner
- For carpeted stairs, treat any stains with a carpet cleaner. Floor Surfaces
- Vacuum hallway carpets in multiple directions to lift the pile
- Mop hard floors with an appropriate cleaner
- Pay attention to threshold areas between rooms where dirt accumulates
- Clean corners and edges thoroughly
- Address high-traffic wear patterns with appropriate treatments
- Check under any hallway furniture for dust and debris
Utility Rooms Washing Machine/Dryer
- Clean exterior surfaces completely
- Wipe control panel and dials
- Clean rubber door seal where mould can accumulate
- Remove and clean detergent drawer
- Run an empty hot wash cycle with a cleaning tablet or white vinegar
- Clean filter according to manufacturer instructions
- Wipe behind and underneath accessible Utility Sinks
- Clean the basin with an appropriate cleaner
- Remove limescale from taps
- Clean drain and overflow
- Wipe surrounding countertops
- Address any watermarks on adjacent surfaces
- Clean underneath sink and surrounding pipes. Storage Areas
- Empty all cupboards and shelving
- Vacuum or wipe interior surfaces
- Clean doors and handles
- Check for and address any leaks or water damage
- Ensure all personal cleaning supplies are removed
- Clean any utility room fixtures and fittings
Built-in Storage Airing Cupboards
- Remove all personal items
- Vacuum or wipe shelving thoroughly
- Check for and address any mould or damp issues
- Clean the hot water tank exterior if accessible
- Wipe doors and surrounding frame
- Ensure the thermostat is dust-free and functioning
Under-stairs Storage
- Empty entirely of all personal belongings
- Vacuum thoroughly, including corners and ceiling
- Check for and remove cobwebs
- Clean any shelving or hooks
- Wipe walls and ceiling of the storage area
- Ensure light works if present (replace the bulb if needed)
Built-in Wardrobes and Cupboards
- Empty all contents
- Vacuum interior completely
- Wipe shelving from top to bottom
- Clean tracking on sliding doors •
- Dust tops of cupboards where visible
- Check for and remove any odours with the appropriate freshener
Windows, Doors, and Fixtures Interior Windows
- Clean all windowsills and tracks
- Remove any mould around window frames
- Clean glass with appropriate window cleaner
- Wipe frames according to material (uPVC, wood, aluminium)
- Address any condensation damage
- Clean blinds and curtain rails thoroughly
- Ensure windows open and close properly
Internal Doors
- Clean both sides of all doors
- Pay special attention to areas around handles
- Wipe top edges of doors (often missed but checked by inspectors)
- Clean doorframes and thresholds
- Address any scuff marks or fingerprints
- Check and clean door stoppers
Light Fixtures
- Turn off and allow to cool before cleaning
- Remove shade/cover where possible
- Dust bulbs carefully when cool
- Clean ceiling roses and surrounding areas
- Replace any blown bulbs
- Clean pull cords if present
- Pay attention to recessed lighting where insects can accumulate
Other Important Areas
Radiators and Heating Elements
- Dust tops and sides of all radiators
- Clean between radiator columns using a specialised brush
- Wipe radiator covers if present
- Clean behind radiators using a radiator brush
- Dust wall-mounted heaters
- Clean thermostat controls, Fuse Boxes, and Meters
- Dust carefully around electrical boxes
- Wipe the exterior of the consumer unit
- Ensure access is clear
- Do not attempt to clean inside electrical panels
Coat Closets and Entryways
- Empty completely
- Vacuum floor and shelving
- Wipe walls which may have marks from coats
- Clean hooks and hangers
- Address any shoe storage areas
- Check for and remove odours from damp outerwear
Final Additional Area Touches
- Check all light bulbs are working
- Ensure all storage areas are empty
- Test that all doors open and close properly
- Confirm windows are secure and locks functional
- Vacuum or mop floors one final time after all other cleaning is complete
- Take clear photographs of cleaned areas for your records